Mold for diecast rear tire for dune buggy scale 110 3D Принт Модель

the mold is intended for the tire manufacture from silicone or similar flexible material in scale 1:10. it consists of 2 parts: top and bottom part. each part can be 3d printed without supports.

mold dimensions:
- diameter – 124 mm
- height – 44 mm

tire dimensions:
- outer diameter – 84 mm
- overall width – 34 mm
- inner diameter – 44 mm

if you want a different wheel size, simply scale the mold.

the bottom mold part has 5 special bosses and top mold part has 5 special holes to guide mold parts in the closed state. also, there are 4 slots for better opening with a screwdriver or similar instrument.
in the top mold part are 4 small holes for material injection.
both mold parts have 4 holes with diameter 6 mm for bolting it in closed state.