mach lander 3d printable car transformer toy 3d print model 3D Принт Модель

SPRING SALE 50% OFF
expires on April 26st, 2025
$5.00 -50%
$2.50
3 DAYS ONLY
Ліцензія:
mach lander 3d printable car transformer toy 3d print model 3D Принт Модель
$5.00 -50%
$ 2.50
Видалити! Додати в закладки
  • Колекція:
    No
  • Готовність до друку:
    Yes
  • 3D Скан:
    No
  • Зміст для дорослих:
    No
  • PBR:
    No
  • Перегляди:
    3980
  • Дата:
  • ID Товару:
    217805
  • Рейтинг:
Повідомити про дану модель
the archive contains 2 folders:
- a folder with the full set of print-ready parts which were redesigned to make the assembly easier
- a folder with the full set of print-ready parts which are fully compatible with the original toy

assembly.pdf
https://drive.google.com/open?id=1nyaofwsf0xjrabj437lhoqgjey5yat7w

to assemble the toy you will need some additional things which you can see on the attached image (for more details please download assembly.pdf):
- 2 pins which contain small nails which are suitable to hold front wheels
- 2 metal spikes 2.2x29mm and 2.2x51mm (hard 2.2mm metal wire will be ok)
- an m3 screw (3x18mm) and a nut for it
- 7 pieces of 5.5mm screws
- 2 screws with a wide head, 5mm long

recommended printing settings:
- every part already has the correct position for printing (the main part will have a lot of support but it is necessary to print the face of the toy correctly and avoid any skewing, if the main part will be somehow skewed. then other parts will look misplaced after the assembly)
- it was tested in abs and pla
- layer height: 0.1
- infill density: 5%
- support: only touching buildplate
- support pattern: concentric
- support density: 20%
- buildplate adhesion type: raft
Потрібно більше форматів?
Якщо вам потрібен інший формат, будь ласка, зробіть запит за допомогою тікета підтримки. Ми можемо конвертувати 3D-моделі: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Ми не конвертуємо 3d сцени і такі формати, як .step, .iges, .stp, .sldprt тощо!

Завантажити mach lander 3d printable car transformer toy 3d print model 3D Принт Модель stl від soundsbeard

transformer car formula toy 3d printable mach lander brave fighter legend da-garn
NEMOG
NEMOG NEMOG  2024-08-16
So far, I had no problem printing the file. The only thing I would say is that the supports are like very hard to remove because of the raft style.
The model is accurate enough to the real toy.
ЦінаПокупецьЦінаДата
Позитивний

Very nice model.

The only thing I've got to say is that the raft support are difficult to remove, and that it can be very tricky to find the right screws to assemble it.

Otherwise it took approximately 11 hrs to print with a 1.2 layer height and ironing enabled (for better surface finish). Note that IMO the piece are not always oriented correctly to minimize the amount of support or favorize the surface finish.

The 3D model is accurate enough to the real toy that's for sure.

Thanks for the modeling!

$5.002024-08-19

Схожі товари від mach lander 3d printable car transformer toy 3d print model

-50%
source files mach lander 3d printable car transformer toy 3D Принт Модель
-50%
Tracer Blaster Mach T Skin - Overwatch - Printable - STL OBJ CAD bundle - Commercial Use 3D Принт Модель
-50%
Tracer Blaster Mach T Skin Skin - Overwatch - Printable - STL files 3D Принт Модель
-50%
Overwatch - Part 2 - 14 Printable models - STL - Personal Use 3D Принт Модель
robot transformer from 90 toy 3D Принт Модель
-50%
Mustang Mach 1969 3d print model 3D Принт Модель
-50%
Overwatch - Part 1 - 15 Printable models - STL - Personal Use 3D Принт Модель
-50%
Star Trek - Part 1 - 11 Printable models - STL - Personal Use 3D Принт Модель
-50%
Star Trek - Part 2 - 11 Printable models - STL - Personal Use 3D Принт Модель
-50%
Halo - 13 Printable models - STL - Personal Use 3D Принт Модель