DIY Wall clock with rope numbers 3D Модель

- Доступні формати: Blender: blend 87.34 MB
Рендер: CyclesAutodesk FBX: fbx 4.58 MBWavefront OBJ: obj 6.22 MB
- Полігони:137431
- Вершини:170757
- Анімована:No
- Текстури:No
- Скелет:No
- Матеріали:
- Низькополігон.:No
- Колекція:No
- UVW зображення:No
- Плагіни:No
- Готовність до друку:No
- 3D Скан:No
- Зміст для дорослих:No
- PBR:No
- ШІ Навчання:No
- Геометрія:Polygonal
- Розгорнуті UVs:Unknown
- Перегляди:238
- Дата: 2025-06-01
- ID Товару:576871
- Рейтинг:
- Make your own custom wall clock made with decorative rope and wooden board
- Wall clock with cheap items you can buy on Chinese online shop sites
- The hand length and the diameter of the board are shown in the picture
- DXF file with a layout for drilling holes for the ropes is included
- The numbers are formed from 6 mm thick ropes and the lines above the numbers are made from 4 mm thick ropes for model-1
- The numbers are formed from 6 mm thick ropes and the frame above the numbers are made from 10 mm thick ropes for model-2
- The materials are prepared for Cycles render
- Clock board contains N-gons
Якщо вам потрібен інший формат, будь ласка, зробіть запит за допомогою тікета підтримки. Ми можемо конвертувати 3D-моделі: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Ми не конвертуємо 3d сцени і такі формати, як .step, .iges, .stp, .sldprt тощо!