design of arc welding workstation with single robot and double fixture 3D Модель

$14.00
design of arc welding workstation with single robot and double fixture 3D Модель
$ 14.00
Видалити! Додати в закладки
  • Анімована:
    No
  • Текстури:
    No
  • Скелет:
    No
  • Матеріали:
  • Низькополігон.:
    No
  • Колекція:
    No
  • UVW зображення:
    No
  • Плагіни:
    No
  • Готовність до друку:
    No
  • 3D Скан:
    No
  • Зміст для дорослих:
    No
  • PBR:
    No
  • Геометрія:
    Polygonal
  • Розгорнуті UVs:
    Unknown
  • Перегляди:
    1996
  • Дата:
  • ID Товару:
    314447
  • Рейтинг:
design of arc welding workstation with single robot and double fixture
catia 3d modeling with stp file and bip file is attached to the scheme design of single robot dual fixture arc welding workstation. the failure rate of the system is low. however, the robot is in the waiting state during the loading and unloading process, so the utilization rate of the robot is generally less than 80%, so it is less used in the new welding line. this form has high reliability, but it has certain restrictions on the overall size of the workpiece to be welded. generally, the diameter of the welded workpiece is less than 0.6 mm. Готовність до друку: Ні
Потрібно більше форматів?
Якщо вам потрібен інший формат, будь ласка, зробіть запит за допомогою тікета підтримки. Ми можемо конвертувати 3D-моделі: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Ми не конвертуємо 3d сцени і такі формати, як .step, .iges, .stp, .sldprt тощо!

Завантажити design of arc welding workstation with single robot and double fixture 3D Модель catia step від tzd

arc welding
До даного товару немає коментарів.