37mm Pak 36 Anti Tank Weapon Low-poly Низькополігон. 3D Модель

$50.00
37mm Pak 36 Anti Tank Weapon Low-poly 3D Модель
$ 50.00
Видалити! Додати в закладки
  • Полігони:
    13764
  • Вершини:
    14101
  • Анімована:
    No
  • Текстури:
  • Скелет:
    No
  • Матеріали:
  • Низькополігон.:
  • Колекція:
    No
  • UVW зображення:
  • Плагіни:
    No
  • Готовність до друку:
    No
  • 3D Скан:
    No
  • Зміст для дорослих:
    No
  • PBR:
  • ШІ Навчання:
    No
  • Геометрія:
    Polygonal
  • Розгорнуті UVs:
    Non-overlapping
  • Перегляди:
    119
  • Дата:
  • ID Товару:
    575425
  • Рейтинг:

3.7 cm Pak 36 Anti Tank Weapon

ZIP file contain Blendfile, Texture folder , FBX , Obj mtl

Centered (in right place) and Seperated parts

Blender 4.0.0

Textured with substance painter (Basecolor , AO , Metalness , Roughness , Normal)

1 Set of material and Texture

10 Seperated Objects

4k Texture

Pictures rendered in Cycles engine

Vertices:14,101

Faces:13,764

Tris: 24,641

Description:The Pak 36 is a 3.7 cm / 37mm caliber German anti-tank g.un used during the Second World War. It was the main anti-tank weapon of Wehrmacht Panzerjäger units until 1942. Developed by Rheinmetall in 1933, it was first issued to the German Army in 1936, with 9,120 being available by the beginning of the war in September 1939 and a further 5,339 produced during the war. As the predominant anti-tank g.un design in the world during the late 1930s, demand was high for the Pak 36, with another 6,000 examples produced for export and the design being copied by the Soviet Union as the 45 mm anti-tank g.un M1932 (19-K) and by other nations such as Japan.It first saw service during the Spanish Civil War in 1936, where it performed well against the light tanks of the conflict. It was first used during the Second World War against Poland in 1939 and had little difficulty with any of the Polish tanks. The Battle of France in 1940 revealed its inadequate penet.ration capability against French and British heavier tanks, particularly the Char B1, and especially the Matilda II, receiving the derisive nicknames Heeresanklopfgerät (army door-knocking device) or PanzerAnklopfKanone (tank door-knocking cannon) from its crews, but it sufficed to defeat the bulk of the Allied armor in the campaign. The invasion of the Soviet Union brought the Pak 36 face to face with large numbers of T-34 and KV-1 tanks, which were invulnerable to its fire. However, 91% of the Soviet tank forces in 1941 consisted of lighter types that lacked sufficient armor to defeat the g.un, and the Pak 36 knocked out thousands of such tanks.

Готовність до друку: Ні
Потрібно більше форматів?
Якщо вам потрібен інший формат, будь ласка, зробіть запит за допомогою тікета підтримки. Ми можемо конвертувати 3D-моделі: .stl, .c4d, .obj, .fbx, .ma/.mb, .3ds, .3dm, .dxf/.dwg, .max. .blend, .skp, .glb. Ми не конвертуємо 3d сцени і такі формати, як .step, .iges, .stp, .sldprt тощо!

Завантажити 37mm Pak 36 Anti Tank Weapon Low-poly 3D Модель fbx від OK3D

ww2 military war army german wehrmacht anti tank pak pak36 lowpoly weapon wwii 37mm low poly atgun armor panzer
До даного товару немає коментарів.